Replacing the tires on your Everyday Motorcycles Zero S is essential for maintaining optimal performance and safety. Whether you're noticing wear or preparing for a long ride, following a clear step-by-step process ensures the job is done correctly.

What You'll Need

  • New tires compatible with Zero S
  • Tire levers
  • Socket wrench set
  • Valve core remover
  • Bead breaker or tire changing tool
  • Air compressor or hand pump
  • Torque wrench
  • Lubricant (soapy water or tire mounting lubricant)

Step-by-Step Tire Replacement

  1. Prepare your workspace: Place the motorcycle on a stable stand to lift the wheel off the ground.
  2. Remove the wheel: Use the socket wrench to loosen and remove the axle nuts and carefully slide out the wheel.
  3. Deflate the tire: Remove the valve cap and use the valve core remover to release all air from the tire.
  4. Break the bead: Use a bead breaker tool to separate the tire bead from the rim all around the wheel.
  5. Remove the tire: Insert tire levers between the tire and rim, carefully prying the tire off one side at a time.
  6. Install the new tire: Lubricate the tire bead and rim, then fit the new tire onto the rim, starting with one side and then the other.
  7. Inflate the tire: Inflate to the recommended pressure, ensuring the bead seats properly on the rim.
  8. Reinstall the wheel: Slide the wheel back into position, tighten the axle nuts to the manufacturer’s specified torque.
  9. Final check: Spin the wheel to ensure it rotates freely and check tire pressure once more before riding.

Regularly inspecting and replacing your Zero S tires will help you enjoy a smooth, safe ride every time. If you're unsure about any step, consult your motorcycle manual or seek professional assistance.