Upgrading your Everyday Motorcycles Streetfighter with a performance exhaust can significantly enhance both the sound and performance of your bike. This step-by-step guide will walk you through the installation process to ensure a smooth and successful upgrade.

Tools and Materials Needed

  • Performance exhaust kit compatible with the Streetfighter
  • Socket wrench set
  • Screwdrivers (Phillips and flathead)
  • Penetrating oil (optional, for rusted bolts)
  • Torque wrench
  • Gloves and safety glasses

Installation Steps

Follow these steps carefully to install your new exhaust:

  1. Prepare the Motorcycle: Ensure the bike is cooled down and securely placed on a stand to prevent movement.
  2. Remove the Stock Exhaust: Use your socket wrench to loosen and remove bolts connecting the stock exhaust to the bike. Apply penetrating oil if bolts are stuck.
  3. Detach Exhaust Gaskets: Carefully remove the old gaskets; replace them if worn out to prevent leaks.
  4. Position the Performance Exhaust: Align the new exhaust system with the mounting points. Make sure it fits snugly without forcing any parts.
  5. Secure the Exhaust: Tighten all bolts by hand first, then use the torque wrench to apply manufacturer-specified torque settings.
  6. Check for Clearance: Verify that the exhaust doesn’t touch any wires or body parts that could melt or wear.
  7. Start the Engine and Inspect: Turn on the bike and listen for any unusual noises or leaks. Re-tighten bolts if necessary after a short test ride.

Installing a performance exhaust not only improves your Streetfighter’s look and sound but also can increase horsepower and throttle response. Always check local regulations regarding exhaust modifications to stay compliant.