Installing crash bars on your Everyday Motorcycles Tiger 900 is a smart investment to protect your bike's engine and bodywork during unexpected falls. Crash bars not only help prevent costly damage but also add an extra layer of safety for riders who enjoy off-road adventures or urban commuting.

Tools and Materials Needed

  • Crash bar kit specifically designed for the Tiger 900
  • Socket wrench set
  • Allen keys
  • Torque wrench
  • Thread locker (optional)
  • Protective gloves

Step-by-Step Installation Guide

  1. Prepare Your Motorcycle: Park your Tiger 900 on a flat surface and ensure it is stable using the center stand or paddock stand.
  2. Remove Necessary Components: Depending on the crash bar design, you may need to remove side panels or engine guards for access.
  3. Align the Crash Bars: Hold the crash bars in place, matching mounting points on the frame carefully.
  4. Secure the Bars: Use the provided bolts and your socket wrench or Allen keys to fasten the crash bars loosely at first.
  5. Tighten Bolts: Once all bolts are in place, use a torque wrench to tighten them to the manufacturer’s recommended specifications.
  6. Apply Thread Locker: For extra security, apply thread locker to bolts before final tightening.
  7. Reinstall Removed Parts: Put back any panels or guards you removed during the process.
  8. Final Check: Inspect all fasteners and ensure the crash bars are firmly attached without any movement.

With your crash bars installed, your Tiger 900 is better equipped to handle minor falls and scrapes. Regularly check the mounting points to ensure they remain tight and in good condition, especially after off-road rides.